|
|
Windows System Exit
Code
Description - 1000
to 1999
1001 Recursion too deep;
the stack overflowed.
1002 The window cannot act on the sent message.
1003 Cannot complete this function.
1004 Invalid flags.
1005 The volume does not contain a recognized file system. Please make sure
that all required file system drivers are loaded and that the volume is not
corrupted.
1006 The volume for a file has been externally altered so that the opened
file is no longer valid.
1007 The requested operation cannot be performed in full-screen mode.
1008 An attempt was made to reference a token that does not exist.
1009 The configuration registry database is corrupt.
1010 The configuration registry key is invalid.
1011 The configuration registry key could not be opened.
1012 The configuration registry key could not be read.
1013 The configuration registry key could not be written.
1014 One of the files in the registry database had to be recovered by use of
a log or alternate copy. The recovery was successful.
1015 The registry is corrupted. The structure of one of the files containing
registry data is corrupted, or the system's memory image of the file is
corrupted, or the file could not be recovered because the alternate copy or
log was absent or corrupted.
1016 An I/O operation initiated by the registry failed unrecoverably. The
registry could not read in, or write out, or flush, one of the files that
contain the system's image of the registry.
1017 The system has attempted to load or restore a file into the registry,
but the specified file is not in a registry file format.
1018 Illegal operation attempted on a registry key that has been marked for
deletion.
1019 System could not allocate the required space in a registry log.
1020 Cannot create a symbolic link in a registry key that already has
subkeys or values.
1021 Cannot create a stable subkey under a volatile parent key.
1022 A notify change request is being completed and the information is not
being returned in the caller's buffer. The caller now needs to enumerate the
files to find the changes.
1051 A stop control has been sent to a service that other running services
are dependent on.
1052 The requested control is not valid for this service.
1053 The service did not respond to the start or control request in a timely
fashion.
1054 A thread could not be created for the service.
1055 The service database is locked.
1056 An instance of the service is already running.
1057 The account name is invalid or does not exist, or the password is
invalid for the account name specified.
1058 The service cannot be started, either because it is disabled or because
it has no enabled devices associated with it.
1059 Circular service dependency was specified.
1060 The specified service does not exist as an installed service.
1061 The service cannot accept control messages at this time.
1062 The service has not been started.
1063 The service process could not connect to the service controller.
1064 An exception occurred in the service when handling the control
request.
1065 The database specified does not exist.
1066 The service has returned a service-specific error code.
1067 The process terminated unexpectedly.
1068 The dependency service or group failed to start.
1069 The service did not start due to a logon failure.
1070 After starting, the service hung in a start-pending state.
1071 The specified service database lock is invalid.
1072 The specified service has been marked for deletion.
1073 The specified service already exists.
1074 The system is currently running with the last-known-good
configuration.
1075 The dependency service does not exist or has been marked for deletion.
1076 The current boot has already been accepted for use as the
last-known-good control set.
1077 No attempts to start the service have been made since the last boot.
1078 The name is already in use as either a service name or a service
display name.
1079 The account specified for this service is different from the account
specified for other services running in the same process.
1080 Failure actions can only be set for Win32 services, not for drivers.
1081 This service runs in the same process as the service control manager.
Therefore, the service control manager cannot take action if this service's
process terminates unexpectedly.
1082 No recovery program has been configured for this service.
1083 The executable program that this service is configured to run in does
not implement the service.
1084 This service cannot be started in Safe Mode.
1100 The physical end of the tape has been reached.
1101 A tape access reached a filemark.
1102 The beginning of the tape or a partition was encountered.
1103 A tape access reached the end of a set of files.
1104 No more data is on the tape.
1105 Tape could not be partitioned.
1106 When accessing a new tape of a multivolume partition, the current block
size is incorrect.
1107 Tape partition information could not be found when loading a tape.
1108 Unable to lock the media eject mechanism.
1109 Unable to unload the media.
1110 The media in the drive may have changed.
1111 The I/O bus was reset.
1112 No media in drive.
1113 No mapping for the Unicode character exists in the target multi-byte
code page.
1114 A dynamic link library (DLL) initialization routine failed.
1115 A system shutdown is in progress.
1116 Unable to abort the system shutdown because no shutdown was in
progress.
1117 The request could not be performed because of an I/O device error.
1118 No serial device was successfully initialized. The serial driver will
unload.
1119 Unable to open a device that was sharing an interrupt request (IRQ)
with other devices. At least one other device that uses that IRQ was already
opened.
1120 A serial I/O operation was completed by another write to the serial
port. (The IOCTL_SERIAL_XOFF_COUNTER reached zero.)
1121 A serial I/O operation completed because the timeout period expired.
(The IOCTL_SERIAL_XOFF_COUNTER did not reach zero.)
1122 No ID address mark was found on the floppy disk.
1123 Mismatch between the floppy disk sector ID field and the floppy disk
controller track address.
1124 The floppy disk controller reported an error that is not recognized by
the floppy disk driver.
1125 The floppy disk controller returned inconsistent results in its
registers.
1126 While accessing the hard disk, a recalibrate operation failed, even
after retries.
1127 While accessing the hard disk, a disk operation failed even after
retries.
1128 While accessing the hard disk, a disk controller reset was needed, but
even that failed.
1129 Physical end of tape encountered.
1130 Not enough server storage is available to process this command.
1131 A potential deadlock condition has been detected.
1132 The base address or the file offset specified does not have the proper
alignment.
1140 An attempt to change the system power state was vetoed by another
application or driver.
1141 The system BIOS failed an attempt to change the system power state.
1142 An attempt was made to create more links on a file than the file system
supports.
1150 The specified program requires a newer version of Windows.
1151 The specified program is not a Windows or MS-DOS program.
1152 Cannot start more than one instance of the specified program.
1153 The specified program was written for an earlier version of Windows.
1154 One of the library files needed to run this application is damaged.
1155 No application is associated with the specified file for this
operation.
1156 An error occurred in sending the command to the application.
1157 One of the library files needed to run this application cannot be
found.
1158 The current process has used all of its system allowance of handles for
Window Manager objects.
1159 The message can be used only with synchronous operations.
1160 The indicated source element has no media.
1161 The indicated destination element already contains media.
1162 The indicated element does not exist.
1163 The indicated element is part of a magazine that is not present.
1164 The indicated device requires reinitialization due to hardware errors.
1165 The device has indicated that cleaning is required before further
operations are attempted.
1166 The device has indicated that its door is open.
1167 The device is not connected.
1168 Element not found.
1169 There was no match for the specified key in the index.
1170 The property set specified does not exist on the object.
1171 The point passed to GetMouseMovePointsEx is not in the buffer.
1172 The tracking (workstation) service is not running.
1173 The Volume ID could not be found.
1175 Unable to remove the file to be replaced.
1176 Unable to move the replacement file to the file to be replaced. The
file to be replaced has retained its original name.
1177 Unable to move the replacement file to the file to be replaced. The
file to be replaced has been renamed using the backup name.
1178 The volume change journal is being deleted.
1179 The volume change journal is not active.
1180 A file was found, but it may not be the correct file.
1181 The journal entry has been deleted from the journal.
1200 The specified device name is invalid.
1201 The device is not currently connected but it is a remembered
connection.
1202 The local device name has a remembered connection to another network
resource.
1203 No network provider accepted the given network path.
1204 The specified network provider name is invalid.
1205 Unable to open the network connection profile.
1206 The network connection profile is corrupted.
1207 Cannot enumerate a noncontainer.
1208 An extended error has occurred.
1209 The format of the specified group name is invalid.
1210 The format of the specified computer name is invalid.
1211 The format of the specified event name is invalid.
1212 The format of the specified domain name is invalid.
1213 The format of the specified service name is invalid.
1214 The format of the specified network name is invalid.
1215 The format of the specified share name is invalid.
1216 The format of the specified password is invalid.
1217 The format of the specified message name is invalid.
1218 The format of the specified message destination is invalid.
1219 Multiple connections to a server or shared resource by the same user,
using more than one user name, are not allowed. Disconnect all previous
connections to the server or shared resource and try again.
1220 An attempt was made to establish a session to a network server, but
there are already too many sessions established to that server.
1221 The workgroup or domain name is already in use by another computer on
the network.
1222 The network is not present or not started.
1223 The operation was canceled by the user.
1224 The requested operation cannot be performed on a file with a
user-mapped section open.
1225 The remote system refused the network connection.
1226 The network connection was gracefully closed.
1227 The network transport endpoint already has an address associated with
it.
1228 An address has not yet been associated with the network endpoint.
1229 An operation was attempted on a nonexistent network connection.
1230 An invalid operation was attempted on an active network connection.
1231 The network location cannot be reached. For information about network
troubleshooting, see Windows Help.
1232 The network location cannot be reached. For information about network
troubleshooting, see Windows Help.
1233 The network location cannot be reached. For information about network
troubleshooting, see Windows Help.
1234 No service is operating at the destination network endpoint on the
remote system.
1235 The request was aborted.
1236 The network connection was aborted by the local system.
1237 The operation could not be completed. A retry should be performed.
1238 A connection to the server could not be made because the limit on the
number of concurrent connections for this account has been reached.
1239 Attempting to log in during an unauthorized time of day for this
account.
1240 The account is not authorized to log in from this station.
1241 The network address could not be used for the operation requested.
1242 The service is already registered.
1243 The specified service does not exist.
1244 The operation being requested was not performed because the user has
not been authenticated.
1245 The operation being requested was not performed because the user has
not logged on to the network. The specified service does not exist.
1246 Continue with work in progress.
1247 An attempt was made to perform an initialization operation when
initialization has already been completed.
1248 No more local devices.
1249 The specified site does not exist.
1250 A domain controller with the specified name already exists.
1251 This operation is supported only when you are connected to the server.
1252 The group policy framework should call the extension even if there are
no changes.
1253 The specified user does not have a valid profile.
1254 This operation is not supported on a Microsoft Small Business Server.
1255 The server machine is shutting down.
1256 The remote system is not available. For information about network
troubleshooting, see Windows Help.
1257 The security identifier provided is not from an account domain.
1258 The security identifier provided does not have a domain component.
1259 AppHelp dialog canceled thus preventing the application from starting.
1260 Windows cannot open this program because it has been prevented by a
software restriction policy. For more information, open Event Viewer or
contact your system administrator.
1261 A program attempt to use an invalid register value. Normally caused by
an uninitialized register. This error is Itanium specific.
1262 The share is currently offline or does not exist.
1263 The kerberos protocol encountered an error while validating the KDC
certificate during smartcard logon.
1264 The kerberos protocol encountered an error while attempting to utilize
the smartcard subsystem.
1265 The system detected a possible attempt to compromise security. Please
ensure that you can contact the server that authenticated you.
1266 The smartcard certificate used for authentication has been revoked.
Please contact your system administrator. There may be additional
information in the event log.
1267 An untrusted certificate authority was detected while processing the
smartcard certificate used for authentication. Please contact your system
administrator.
1268 The revocation status of the smartcard certificate used for
authentication could not be determined. Please contact your system
administrator.
1269 The smartcard certificate used for authentication was not trusted.
Please contact your system administrator.
1270 The smartcard certificate used for authentication has expired. Please
contact your system administrator.
1271 The machine is locked and cannot be shut down without the force
option.
1273 An application-defined callback gave invalid data when called.
1274 The group policy framework should call the extension in the synchronous
foreground policy refresh.
1275 This driver has been blocked from loading.
1276 A dynamic link library (DLL) referenced a module that was neither a DLL
nor the process's executable image.
1300 Not all privileges referenced are assigned to the caller.
1301 Some mapping between account names and security IDs was not done.
1302 No system quota limits are specifically set for this account.
1303 No encryption key is available. A well-known encryption key was
returned.
1304 The password is too complex to be converted to a LAN Manager password.
The LAN Manager password returned is a NULL string.
1305 The revision level is unknown.
1306 Indicates two revision levels are incompatible.
1307 This security ID may not be assigned as the owner of this object.
1308 This security ID may not be assigned as the primary group of an
object.
1309 An attempt has been made to operate on an impersonation token by a
thread that is not currently impersonating a client.
1310 The group may not be disabled.
1311 There are currently no logon servers available to service the logon
request.
1312 A specified logon session does not exist. It may already have been
terminated.
1313 A specified privilege does not exist.
1314 A required privilege is not held by the client.
1315 The name provided is not a properly formed account name.
1316 The specified user already exists.
1317 The specified user does not exist.
1318 The specified group already exists.
1319 The specified group does not exist.
1320 Either the specified user account is already a member of the specified
group, or the specified group cannot be deleted because it contains a
member.
1321 The specified user account is not a member of the specified group
account.
1322 The last remaining administration account cannot be disabled or
deleted.
1323 Unable to update the password. The value provided as the current
password is incorrect.
1324 Unable to update the password. The value provided for the new password
contains values that are not allowed in passwords.
1325 Unable to update the password. The value provided for the new password
does not meet the length, complexity, or history requirement of the domain.
1326 Logon failure: unknown user name or bad password.
1327 Logon failure: user account restriction. Possible reasons are blank
passwords not allowed, logon hour restrictions, or a policy restriction has
been enforced.
1328 Logon failure: account logon time restriction violation.
1329 Logon failure: user not allowed to log on to this computer.
1330 Logon failure: the specified account password has expired.
1331 Logon failure: account currently disabled.
1332 No mapping between account names and security IDs was done.
1333 Too many local user identifiers (LUIDs) were requested at one time.
1334 No more local user identifiers (LUIDs) are available.
1335 The subauthority part of a security ID is invalid for this particular
use.
1336 The access control list (ACL) structure is invalid.
1337 The security ID structure is invalid.
1338 The security descriptor structure is invalid.
1340 The inherited access control list (ACL) or access control entry (ACE)
could not be built.
1341 The server is currently disabled.
1342 The server is currently enabled.
1343 The value provided was an invalid value for an identifier authority.
1344 No more memory is available for security information updates.
1345 The specified attributes are invalid, or incompatible with the
attributes for the group as a whole.
1346 Either a required impersonation level was not provided, or the provided
impersonation level is invalid.
1347 Cannot open an anonymous level security token.
1348 The validation information class requested was invalid.
1349 The type of the token is inappropriate for its attempted use.
1350 Unable to perform a security operation on an object that has no
associated security.
1351 Configuration information could not be read from the domain controller,
either because the machine is unavailable, or access has been denied.
1352 The security account manager (SAM) or local security authority (LSA)
server was in the wrong state to perform the security operation.
1353 The domain was in the wrong state to perform the security operation.
1354 This operation is only allowed for the Primary Domain Controller of the
domain.
1355 The specified domain either does not exist or could not be contacted.
1356 The specified domain already exists.
1357 An attempt was made to exceed the limit on the number of domains per
server.
1358 Unable to complete the requested operation because of either a
catastrophic media failure or a data structure corruption on the disk.
1359 An internal error occurred.
1360 Generic access types were contained in an access mask which should
already be mapped to nongeneric types.
1361 A security descriptor is not in the right format (absolute or
self-relative).
1362 The requested action is restricted for use by logon processes only. The
calling process has not registered as a logon process.
1363 Cannot start a new logon session with an ID that is already in use.
1364 A specified authentication package is unknown.
1365 The logon session is not in a state that is consistent with the
requested operation.
1366 The logon session ID is already in use.
1367 A logon request contained an invalid logon type value.
1368 Unable to impersonate using a named pipe until data has been read from
that pipe.
1369 The transaction state of a registry subtree is incompatible with the
requested operation.
1370 An internal security database corruption has been encountered.
1371 Cannot perform this operation on built-in accounts.
1372 Cannot perform this operation on this built-in special group.
1373 Cannot perform this operation on this built-in special user.
1374 The user cannot be removed from a group because the group is currently
the user's primary group.
1375 The token is already in use as a primary token.
1376 The specified local group does not exist.
1377 The specified account name is not a member of the local group.
1378 The specified account name is already a member of the local group.
1379 The specified local group already exists.
1380 Logon failure: the user has not been granted the requested logon type
at this computer.
1381 The maximum number of secrets that may be stored in a single system has
been exceeded.
1382 The length of a secret exceeds the maximum length allowed.
1383 The local security authority database contains an internal
inconsistency.
1384 During a logon attempt, the user's security context accumulated too
many security IDs.
1385 Logon failure: the user has not been granted the requested logon type
at this computer.
1386 A cross-encrypted password is necessary to change a user password.
1387 A new member could not be added to or removed from the local group
because the member does not exist.
1388 A new member could not be added to a local group because the member has
the wrong account type.
1389 Too many security IDs have been specified.
1390 A cross-encrypted password is necessary to change this user password.
1391 Indicates an ACL contains no inheritable components.
1392 The file or directory is corrupted and unreadable.
1393 The disk structure is corrupted and unreadable.
1394 There is no user session key for the specified logon session.
1395 The service being accessed is licensed for a particular number of
connections. No more connections can be made to the service at this time
because there are already as many connections as the service can accept.
1396 Logon Failure: The target account name is incorrect.
1397 Mutual Authentication failed. The server's password is out of date at
the domain controller.
1398 There is a time and/or date difference between the client and server.
1399 This operation cannot be performed on the current domain.
1400 Invalid window handle.
1401 Invalid menu handle.
1402 Invalid cursor handle.
1403 Invalid accelerator table handle.
1404 Invalid hook handle.
1405 Invalid handle to a multiple-window position structure.
1406 Cannot create a top-level child window.
1407 Cannot find window class.
1408 Invalid window; it belongs to other thread.
1409 Hot key is already registered.
1410 Class already exists.
1411 Class does not exist.
1412 Class still has open windows.
1413 Invalid index.
1414 Invalid icon handle.
1415 Using private DIALOG window words.
1416 The list box identifier was not found.
1417 No wildcards were found.
1418 Thread does not have a clipboard open.
1419 Hot key is not registered.
1420 The window is not a valid dialog window.
1421 Control ID not found.
1422 Invalid message for a combo box because it does not have an edit
control.
1423 The window is not a combo box.
1424 Height must be less than 256.
1425 Invalid device context (DC) handle.
1426 Invalid hook procedure type.
1427 Invalid hook procedure.
1428 Cannot set nonlocal hook without a module handle.
1429 This hook procedure can only be set globally.
1430 The journal hook procedure is already installed.
1431 The hook procedure is not installed.
1432 Invalid message for single-selection list box.
1433 LB_SETCOUNT sent to non-lazy list box.
1434 This list box does not support tab stops.
1435 Cannot destroy object created by another thread.
1436 Child windows cannot have menus.
1437 The window does not have a system menu.
1438 Invalid message box style.
1439 Invalid system-wide (SPI_*) parameter.
1440 Screen already locked.
1441 All handles to windows in a multiple-window position structure must
have the same parent.
1442 The window is not a child window.
1443 Invalid GW_* command.
1444 Invalid thread identifier.
1445 Cannot process a message from a window that is not a multiple document
interface (MDI) window.
1446 Popup menu already active.
1447 The window does not have scroll bars.
1448 Scroll bar range cannot be greater than MAXLONG.
1449 Cannot show or remove the window in the way specified.
1450 Insufficient system resources exist to complete the requested service.
1451 Insufficient system resources exist to complete the requested service.
1452 Insufficient system resources exist to complete the requested service.
1453 Insufficient quota to complete the requested service.
1454 Insufficient quota to complete the requested service.
1455 The paging file is too small for this operation to complete.
1456 A menu item was not found.
1457 Invalid keyboard layout handle.
1458 Hook type not allowed.
1459 This operation requires an interactive window station.
1460 This operation returned because the timeout period expired.
1461 Invalid monitor handle.
1500 The event log file is corrupted.
1501 No event log file could be opened, so the event logging service did not
start.
1502 The event log file is full.
1503 The event log file has changed between read operations.
1601 The Windows Installer service could not be accessed. This can occur if
you are running Windows in safe mode, or if the Windows Installer is not
correctly installed. Contact your support personnel for assistance.
1602 User cancelled installation.
1603 Fatal error during installation.
1604 Installation suspended, incomplete.
1605 This action is only valid for products that are currently installed.
1606 Feature ID not registered.
1607 Component ID not registered.
1608 Unknown property.
1609 Handle is in an invalid state.
1610 The configuration data for this product is corrupt. Contact your
support personnel.
1611 Component qualifier not present.
1612 The installation source for this product is not available. Verify that
the source exists and that you can access it.
1613 This installation package cannot be installed by the Windows Installer
service. You must install a Windows service pack that contains a newer
version of the Windows Installer service.
1614 Product is uninstalled.
1615 SQL query syntax invalid or unsupported.
1616 Record field does not exist.
1617 The device has been removed.
1618 Another installation is already in progress. Complete that installation
before proceeding with this install.
1619 This installation package could not be opened. Verify that the package
exists and that you can access it, or contact the application vendor to
verify that this is a valid Windows Installer package.
1620 This installation package could not be opened. Contact the application
vendor to verify that this is a valid Windows Installer package.
1621 There was an error starting the Windows Installer service user
interface. Contact your support personnel.
1622 Error opening installation log file. Verify that the specified log file
location exists and that you can write to it.
1623 The language of this installation package is not supported by your
system.
1624 Error applying transforms. Verify that the specified transform paths
are valid.
1625 This installation is forbidden by system policy. Contact your system
administrator.
1626 Function could not be executed.
1627 Function failed during execution.
1628 Invalid or unknown table specified.
1629 Data supplied is of wrong type.
1630 Data of this type is not supported.
1631 The Windows Installer service failed to start. Contact your support
personnel.
1632 The Temp folder is on a drive that is full or inaccessible. Free up
space on the drive or verify that you have write permission on the Temp
folder.
1633 This installation package is not supported by this processor type.
Contact your product vendor.
1634 Component not used on this computer.
1635 This patch package could not be opened. Verify that the patch package
exists and that you can access it, or contact the application vendor to
verify that this is a valid Windows Installer patch package.
1636 This patch package could not be opened. Contact the application vendor
to verify that this is a valid Windows Installer patch package.
1637 This patch package cannot be processed by the Windows Installer
service. You must install a Windows service pack that contains a newer
version of the Windows Installer service.
1638 Another version of this product is already installed. Installation of
this version cannot continue. To configure or remove the existing version of
this product, use Add/Remove Programs on the Control Panel.
1639 Invalid command line argument. Consult the Windows Installer SDK for
detailed command line help.
1640 Only administrators have permission to add, remove, or configure server
software during a Terminal Services remote session. If you want to install
or configure software on the server, contact your network administrator.
1641 The requested operation completed successfully. The system will be
restarted so the changes can take effect.
1642 The upgrade patch cannot be installed by the Windows Installer service
because the program to be upgraded may be missing, or the upgrade patch may
update a different version of the program. Verify that the program to be
upgraded exists on your computer and that you have the correct upgrade
patch.
1643 The patch package is not permitted by software restriction policy.
1644 One or more customizations are not permitted by software restriction
policy.
1700 The string binding is invalid.
1701 The binding handle is not the correct type.
1702 The binding handle is invalid.
1703 The RPC protocol sequence is not supported.
1704 The RPC protocol sequence is invalid.
1705 The string universal unique identifier (UUID) is invalid.
1706 The endpoint format is invalid.
1707 The network address is invalid.
1708 No endpoint was found.
1709 The timeout value is invalid.
1710 The object universal unique identifier (UUID) was not found.
1711 The object universal unique identifier (UUID) has already been
registered.
1712 The type universal unique identifier (UUID) has already been
registered.
1713 The RPC server is already listening.
1714 No protocol sequences have been registered.
1715 The RPC server is not listening.
1716 The manager type is unknown.
1717 The interface is unknown.
1718 There are no bindings.
1719 There are no protocol sequences.
1720 The endpoint cannot be created.
1721 Not enough resources are available to complete this operation.
1722 The RPC server is unavailable.
1723 The RPC server is too busy to complete this operation.
1724 The network options are invalid.
1725 There are no remote procedure calls active on this thread.
1726 The remote procedure call failed.
1727 The remote procedure call failed and did not execute.
1728 A remote procedure call (RPC) protocol error occurred.
1730 The transfer syntax is not supported by the RPC server.
1732 The universal unique identifier (UUID) type is not supported.
1733 The tag is invalid.
1734 The array bounds are invalid.
1735 The binding does not contain an entry name.
1736 The name syntax is invalid.
1737 The name syntax is not supported.
1739 No network address is available to use to construct a universal unique
identifier (UUID).
1740 The endpoint is a duplicate.
1741 The authentication type is unknown.
1742 The maximum number of calls is too small.
1743 The string is too long.
1744 The RPC protocol sequence was not found.
1745 The procedure number is out of range.
1746 The binding does not contain any authentication information.
1747 The authentication service is unknown.
1748 The authentication level is unknown.
1749 The security context is invalid.
1750 The authorization service is unknown.
1751 The entry is invalid.
1752 The server endpoint cannot perform the operation.
1753 There are no more endpoints available from the endpoint mapper.
1754 No interfaces have been exported.
1755 The entry name is incomplete.
1756 The version option is invalid.
1757 There are no more members.
1758 There is nothing to unexport.
1759 The interface was not found.
1760 The entry already exists.
1761 The entry is not found.
1762 The name service is unavailable.
1763 The network address family is invalid.
1764 The requested operation is not supported.
1765 No security context is available to allow impersonation.
1766 An internal error occurred in a remote procedure call (RPC).
1767 The RPC server attempted an integer division by zero.
1768 An addressing error occurred in the RPC server.
1769 A floating-point operation at the RPC server caused a division by
zero.
1770 A floating-point underflow occurred at the RPC server.
1771 A floating-point overflow occurred at the RPC server.
1772 The list of RPC servers available for the binding of auto handles has
been exhausted.
1773 Unable to open the character translation table file.
1774 The file containing the character translation table has fewer than 512
bytes.
1775 A null context handle was passed from the client to the host during a
remote procedure call.
1777 The context handle changed during a remote procedure call.
1778 The binding handles passed to a remote procedure call do not match.
1779 The stub is unable to get the remote procedure call handle.
1780 A null reference pointer was passed to the stub.
1781 The enumeration value is out of range.
1782 The byte count is too small.
1783 The stub received bad data.
1784 The supplied user buffer is not valid for the requested operation.
1785 The disk media is not recognized. It may not be formatted.
1786 The workstation does not have a trust secret.
1787 The security database on the server does not have a computer account
for this workstation trust relationship.
1788 The trust relationship between the primary domain and the trusted
domain failed.
1789 The trust relationship between this workstation and the primary domain
failed.
1790 The network logon failed.
1791 A remote procedure call is already in progress for this thread.
1792 An attempt was made to logon, but the network logon service was not
started.
1793 The user's account has expired.
1794 The redirector is in use and cannot be unloaded.
1795 The specified printer driver is already installed.
1796 The specified port is unknown.
1797 The printer driver is unknown.
1798 The print processor is unknown.
1799 The specified separator file is invalid.
1800 The specified priority is invalid.
1801 The printer name is invalid.
1802 The printer already exists.
1803 The printer command is invalid.
1804 The specified datatype is invalid.
1805 The environment specified is invalid.
1806 There are no more bindings.
1807 The account used is an interdomain trust account. Use your global user
account or local user account to access this server.
1808 The account used is a computer account. Use your global user account or
local user account to access this server.
1809 The account used is a server trust account. Use your global user
account or local user account to access this server.
1810 The name or security ID (SID) of the domain specified is inconsistent
with the trust information for that domain.
1811 The server is in use and cannot be unloaded.
1812 The specified image file did not contain a resource section.
1813 The specified resource type cannot be found in the image file.
1814 The specified resource name cannot be found in the image file.
1815 The specified resource language ID cannot be found in the image file.
1816 Not enough quota is available to process this command.
1817 No interfaces have been registered.
1818 The remote procedure call was cancelled.
1819 The binding handle does not contain all required information.
1820 A communications failure occurred during a remote procedure call.
1821 The requested authentication level is not supported.
1822 No principal name registered.
1823 The error specified is not a valid Windows RPC error code.
1824 A UUID that is valid only on this computer has been allocated.
1825 A security package specific error occurred.
1826 Thread is not canceled.
1827 Invalid operation on the encoding/decoding handle.
1828 Incompatible version of the serializing package.
1829 Incompatible version of the RPC stub.
1830 The RPC pipe object is invalid or corrupted.
1831 An invalid operation was attempted on an RPC pipe object.
1832 Unsupported RPC pipe version.
1898 The group member was not found.
1899 The endpoint mapper database entry could not be created.
1900 The object universal unique identifier (UUID) is the nil UUID.
1901 The specified time is invalid.
1902 The specified form name is invalid.
1903 The specified form size is invalid.
1904 The specified printer handle is already being waited on
1905 The specified printer has been deleted.
1906 The state of the printer is invalid.
1907 The user's password must be changed before logging on the first time.
1908 Could not find the domain controller for this domain.
1909 The referenced account is currently locked out and may not be logged on
to.
1910 The object exporter specified was not found.
1911 The object specified was not found.
1912 The object resolver set specified was not found.
1913 Some data remains to be sent in the request buffer.
1914 Invalid asynchronous remote procedure call handle.
1915 Invalid asynchronous RPC call handle for this operation.
1916 The RPC pipe object has already been closed.
1917 The RPC call completed before all pipes were processed.
1918 No more data is available from the RPC pipe.
1919 No site name is available for this machine.
1920 The file cannot be accessed by the system.
1921 The name of the file cannot be resolved by the system.
1922 The entry is not of the expected type.
1923 Not all object UUIDs could be exported to the specified entry.
1924 Interface could not be exported to the specified entry.
1925 The specified profile entry could not be added.
1926 The specified profile element could not be added.
1927 The specified profile element could not be removed.
1928 The group element could not be added.
1929 The group element could not be removed.
1930 The printer driver is not compatible with a policy enabled on your
computer that blocks NT 4.0 drivers.
1931 The context has expired and can no longer be used.
Related Topics
Windows System Exit Code
Description - 1 to
999
Windows System Exit Code
Description - 1000
to 1999
Windows System Exit Code
Description - 2000
to 9999
Windows System Exit Code
Description - 10000 and above |
|
