Home | Site Map | Cisco How To Net How To | Wireless | Search | Forums | Services | Setup Guide | Careers | About Us | Contact Us|

Bob Lin Photography services

Real Estate Photography services 

 

Event ID 38, 47 and 29 - Source: W32Time

The time provider NtpClient cannot reach or is currently receiving invalid time data from NTP_server_IP_Address.

Time Provider NtpClient: No valid response has been received from manually configured peer NTP_server_IP_Address after 8 attempts to contact it.

The time provider NtpClient is configured to acquire time from one or more time sources, however none of the sources are currently accessible.

Symptoms: When checking the Event Viewer, you may have the following Event ID:

Source: W32Time
Event ID: 38
Description: The time provider NtpClient cannot reach or is currently receiving invalid time data from NTP_server_IP_Address.

Event Source: W32Time
Event ID: 47
Description: Time Provider NtpClient: No valid response has been received from manually configured peer NTP_server_IP_Address after 8 attempts to contact it. This peer will be discarded as a time source and NtpClient will attempt to discover a new peer with this DNS name.

Event Source: W32Time
Event ID: 29
Description: The time provider NtpClient is configured to acquire time from one or more time sources, however none of the sources are currently accessible. No attempt to contact a source will be made for 15 minutes. NtpClient has no source of accurate time.

Cause: By default, Windows Server 2003 domain controllers are configured as time servers and use symmetric active mode to send synchronization requests. However, some NTP servers requests to use client mode only.

Resolution: 1. To resolve this problem, configure Windows Time to use client mode with 0x08 (send request as Client mode) when it synchronizes with the time server. To do this, follow these steps:

1.

Click Start, click Run, type cmd, and then press ENTER.

2.

At the command prompt, type the following commands in the order that they are given. After you type each command, press ENTER.

w32tm /config /manualpeerlist:NTP_server_IP_Address,0x8 /syncfromflags:MANUAL

net stop w32time

net start w32time

w32tm /resync

 

2. How to configure Windows Time Server to use an external time source on a Windows 2003

Related Topics

Event ID Troubleshooting

Event ID: 2011 - Not enough server storage is available to process this ... Event ID 5701 - The Netlogon service failed to update the domain trust list ...
www.chicagotech.net/wineventid.htm

 

 

Bob Lin Photography services

Real Estate Photography services 

 

  This web is provided "AS IS" with no warranties.
Copyright 2002-2017 ChicagoTech.net, All rights reserved. Unauthorized reproduction forbidden.