Home | Site Map | Cisco How ToNet How To | Wireless |Search | Forums | Services | Donations | Careers | About Us | Contact Us|

What's the key to run BIOS in Lenovo Laptop

Network Sharing , TCP/IP, Internet, Wireless, Exchange, IIS, ISA and Print

What's the key to run BIOS in Lenovo Laptop

Postby guest » Fri Jan 08, 2016 12:54 pm

Q: What's the key to run BIOS in Lenovo Laptop, for example G51?

A: Press F2 or F12 when booting.
Tablet and Smartphone Setup Guide
http://www.quicksetupguide.com

Troubleshooting Vista Wireless
http://chicagotech.net/
guest
 
Posts: 10191
Joined: Mon Nov 27, 2006 1:10 pm

Re: What's the key to run BIOS in Lenovo Laptop

Postby guest » Fri Jan 08, 2016 2:55 pm

There are several ways to enter Setup Utility (F1) or the Boot Menu (F12) on a Microsoft Windows 8/8.1 PC as explained below:
1.Press and hold the Shift key while selecting the Shutdown option in Windows 8. This will make the PC perform a full shutdown instead of a hybrid shutdown. Then F1 or F12 can be pressed successfully during startup.
2. Select Restart instead of Shutdown. Then F1 or F12 can be pressed successfully during startup.
3. Disable the fast startup option in Control Panel -> Hardware and Sound -> Power Options -> Choose what the power buttons do.


It is also possible to access these features from within Windows 8/8.1.

Windows 8

To enter Setup Utility:
1.Open the Charm Bar by pressing Windows Key-C
2.Click on Settings
3.Click on Change PC Settings
4.Click on General
5.Scroll to the bottom and click on Advanced Startup -> Restart Now
6.Click on Troubleshoot
7.Click on Advanced Options
8.Click on UEFI Firmware Settings
9.Click on Restart


To access the Boot Menu:
1.Open the Charm Bar by pressing Windows Key-C
2.Click on Settings
3. Click on Change PC Settings
4. Click on General
5. Scroll to the bottom and click on Advanced Startup -> Restart Now

6. Click on Use A Device
7. Click on Boot Menu


Windows 8.1

To enter Setup Utility:
1.Open the Charm Bar by pressing Windows Key-C
2.Click on Settings
3.Click on Change PC Settings
4.Click on Update and Recovery -> Recovery
5.Scroll to the bottom and click on Advanced Startup -> Restart Now
6.Click on Troubleshoot
7.Click on Advanced Options
8.Click on UEFI Firmware Settings
9.Click on Restart


To access the Boot Menu:
1.Open the Charm Bar by pressing Windows Key-C
2.Click on Settings
3. Click on Change PC Settings
4.Click on Update and Recovery -> Recovery
5. Scroll to the bottom and click on Advanced Startup -> Restart Now

6. Click on Use A Device
7. Click on Boot Menu
Tablet and Smartphone Setup Guide
http://www.quicksetupguide.com

Troubleshooting Vista Wireless
http://chicagotech.net/
guest
 
Posts: 10191
Joined: Mon Nov 27, 2006 1:10 pm


Return to Networking

Your Ad Here

Who is online

Users browsing this forum: No registered users and 5 guests