Home | Site Map | Cisco How To Net How To | Wireless | Search | Forums | Services | Setup Guide | Chicagotech MVP | About Us | Contact Us|

Bob Lin Photography services

Real Estate Photography services 
Error Code - Resolution with Screenshots

Could not format a partition Error code: 0x80070057
DFS replication fails on server with a DFSR error 6006
Error code 0x800704cf
Error 2: The system cannot find the file specified
Error 404: Page cannot be displayed
Error 1003: Cannot complete the function
Error 1053: The service did not respond to the start or control request in a timely fashion.
Error 1309. Error reading from file: path\filename.cab
Error 649 Cases
Error 10045, 4292, 7023
Error 10045 - The attempted operation is not supported for the type of object referenced
Error 10047: An address incompatible with the requested protocol was used
Error 10047: An address incompatible with the requested protocol was used.
Error codes: 0x80070534 and 0x8100002A
Microsoft Update receives error "0x800B0100
No mapping between account names and security 0x80070534
Ping: transmit failed, error code 10050 or 65
PING: transmit failed, error code 65

Ping transmit failed error code collections

Still see deleted share folder with Error 0x800710FE
Troubleshooting error code 0x80070035
Vista print Error 0x00000866
Windows stop error code: 0x0000008e - Case Collections
Winload.exe error 0XC0000001

 

Ping: transmit failed, error code 10050 or 65

Symptom: When attempting to verify network connectivity with a remote computer by using the Ping.exe command, you may receive a command-line error message similar to the following: Ping: transmit failed, error code 65 or PING: transmit failed, error code 10050.

Resolutions: This behavior can occur if the following conditions are true: 1) ICS is enabled; 2) a firewall software is running on the computer; 3) The ZoneLabs program is not correctly configured for ICS.

To fix the problem: 1) re-configure ZoneAlarm for ICS. 2) Remove the Zone Labs firewall software from the computer.

Error 1053: The service did not respond to the start or control request in a timely fashion.

When attempting to tart a service, you may receive above error. The resolutions are 1) Depending on your system setup, you may try to run the service under Local System or the administrator account. 2) make sure dependencies is running. 3) Make sure the related files have correct permission. For example, if you can't start the Task Schedule service, you may need to check the if the %SystemRoot%\Schedlgu.txt file has the Read-Only attribute. If yes, you may want to assign write permission.

Error 1053: The service did not respond to the start or control request in a timely fashion - Case study

 

  This web is provided "AS IS" with no warranties.
Copyright 2002-2017 ChicagoTech.net, All rights reserved. Unauthorized reproduction forbidden.