Home | Site Map | Cisco How To | Net How To | Wireless | Search | Forums | Services | Setup Guide | Resume | About Us | Contact Us|
|
Workstation Service IssuesIf a computer doesn’t have workstation service running and installed, you may have the following symptoms:1. When mapping a network drive, you may receive this error “The drive could not be mapped because no network was found”.2. When using net view \\computer or net use \\IP, you may receive this message: “System error 67. The network name cannot be found” 3. The vent Viewer may have “Event ID: 3095 - Source: NETLOGON - This Windows NT computer is configured as a member of a workgroup, not as a member of a domain. The Netlogon service does not need to run in this configuration” logged. Related Topics
The drive
could not be mapped because no network was found
|
| Case Study - System Error 53 - The
network path was not found. ... Symptom: when
using net use to map a network drive, you may receive
"System error 1326 ... www.chicagotech.net/systemerrors.htm |
| Network path was not
found." Resolutions: ... Symptoms: When mapping a
network drive using net use or using the net view command
to view a different ... www.chicagotech.net/accesserrors.htm |
| Event ID 52 - Description: Object
Name not found · Event ID 333 - An I/O operation initiated by
... 2) if xp, open Windows Explorer>Tools>Map Network Drive.
... www.chicagotech.net/wineventid.htm |
| The network path was not
found" when using net view \\computername from a ...
computer is not available" when using net use to map the
computer drive. ... www.chicagotech.net/nettroublshooting.htm |
| You can also disconnect the
mapped drive in Windows Explorer by right-click the mapped
drive and select disconnection. "Network path not found"
in a domain ... www.chicagotech.net/neterrors.htm |
|
|
This web is provided "AS IS" with no warranties.
Copyright © 2002-2013
ChicagoTech.net,
All rights reserved. Unauthorized reproduction forbidden.